Jangro Product Data Sheet

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY PRODUCT

Trade Name : JANGRO PINE DISINFECTANT
Supplier :

Jangro Limited

James House

Worsley Road

Farnworth, Bolton

BL4 9NL

Tel. 0845 458 5223

Emergency: 01865 407333 (24 hr)

2 COMPOSITION / INFORMATION ON INGREDIENTS

Ingredient Name EINECS No. CAS No. % Range Symbol Risk Phrase
Alkyl Dimethyl Benzyl          
Ammonium Chloride 273-544-1 68989-00-4 <1 C R21/22-34-50

3. HAZARD IDENTIFICATION

Not classified as hazardous, however it is recommended to avoid contact with eyes and prolonged contact with skin.

4. FIRST AID MEASURES
Eyes : Irrigate thoroughly with water or eye wash for 15 minutes. Obtain medical attention if irritation persists.
Skin : Remove contaminated clothing. Wash thoroughly with plenty of running water. Obtain medical attention if symptoms develop.
Ingestion : Do not induce vomiting. Provided the patient is conscious, wash out mouth with water and give water to drink. Obtain medical attention if irritation persists.
Inhalation : Remove to fresh air.
5. FIRE FIGHTING MEASURES
Extinguishing Media : Water, foam or dry chemical.
Not normally a fire hazard.  
6. ACCIDENTAL RELEASE MEASURES
Small Spillage : Dilute to waste with plenty of water.
Large Spillage : Absorb with sand, earth or granules and dispose of according to Local Authority regulations. Do not contaminate water courses or sewers,

7. HANDLING AND STORAGE

Handling : Use the personal protective equipment listed below when handling concentrate
Storage : For long periods in storage, keep in polythene containers in a cool place.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION

PVC or rubber gloves, eye shields.

Occupational Exposure Limits
:
Hazardous Ingredient LTEL 8hr TWA STEL  
ppm mg/m3 ppm mg/m3
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical Form : Clear amber or green liquid
Odour : Pine
pH : Typical 8.9
Flash Point C : n/a
Relative Density (20C) : 1.001 typical
Solubility in Water : Soluble

10. STABILITY AND REACTIVITY

Stability : Stable
Conditions to Avoid : None know
Materials to Avoid : Aluminum
Hazardous Decomposition Products : None when stored and handled correctly.
11. TOXICOLOGICAL INFORMATION
Inhalation : No risk from vapour in normal use.
Ingestion : Small quantities swallowed are unlikely to have any effect. Large quantities may irritate the mouth, gullet and stomach and possibly lead to nausea or vomiting.
Skin : Prolonged or repeated contact may result in irritation.
Eyes : May irritate and inflame.
12. ECOLOGICAL INFORMATION

There are no test data for the preparation, however, based in ingredient data, this material is unlikely to accumulate in the environment and environmental problems in normal use are not expected.

13. DISPOSAL CONSIDERATIONS
Disposal Methods : Dispose of according to Local Authority regulations. Wash out containers with water before disposal.
14. TRANSPORT INFORMATION
Road : Not classified as hazardous
UN No :  
TREM Card No :  
ADR/RID Class :  
IMDG Class and Packaging Group :  
Proper Shipping Name :  
Marine Pollutant : No
Customs Tariff : 3808 40 10
15. REGULATORY INFORMATION
CHIP Classification : Not classified as hazardous
Hazard Symbol :  
Safety Phrases : S2 Keep out of reach of children

S24/25 Avoid contact with skin and eyes

16. OTHER INFORMATION

This information is based on our present state of knowledge and is intended to describe our products from the point of view of the safety requirements. However, the information is provided without any warrantee, express or implied regarding its correctness.

Text of the R-phrases that are allocated to the ingredients listed in section 2 of this safety data sheet.

R21/22 Harmful in contact with skin and if swallowed

R34 Causes burns

R50 Very toxic to aquatic organisms

Description

This product is an effective disinfectant with a pleasant odour based upon Quaternary Ammonium compounds.

Whilst conforming to the requirements of BS 6424: 1984 Group QAP 30, the product is available in floral or the traditional pine odour and can be coloured either amber or green.

The QAC aromatic fluids are designed for light duty disinfectant on surfaces or articles that are visibly clean or only lightly soiled.

Heavily soiled articles on surfaces should be rinsed clean before being disinfected or an alternative type of disinfectant should be used.

The Quaternary Ammonium Compounds have activity against a wide range of resistant pathogenic bacteria including many gram-positive and gram-negative bacteria.

The product destroys odour-forming bacteria at source thereby eliminating unpleasant smells and can be used in washroom areas, sinks, toilets, and on floors, walls, surfaces etc.

When diluted in effluent this product is completely biodegradable and due to its low toxicity, can be used in food processing, dairy, cosmetic and pharmaceutical areas.

Recommendations for Use

General Disinfection   Dilute 1 part to 30 parts fresh, clean water.
Flushing   Use neat for sinks, drains and gulley’s
Washing   For routine cleaning and deodorising of floors, walls and painted surfaces, dilute 1 part in 60 parts of clean water.
Soaking   Soiled linen, handkerchiefs, heavily soiled articles should be rinsed clean before disinfection.

Pack Size

5 Litres

Typical Product Data

Physical Form : Clear amber or green liquid
Odour : Pine
pH : Typical 8.9
Flash Point C : n/a
Relative Density (20C) : 1.001 typical

Storage Information

Store in original sealed container and protect from extremes of temperature.